Toro 8-25 chain adjustment - Toro Lawn Mower With Toro Power Tools

Try SEARSPARTSDIRECT.com. I think you will find what you need. Good Luck Friend.

refer to your owners manual. if you don't have one then go to toro.com to download one

try these
https://www.bing.com/videos/search?q=carb+adjustment+instructions+for+a+toro+518+snow+blower&qpvt=Carb+adjustment+instructions+for+a+Toro+518+snow+blower&FORM=VDRE

Instructions come with your manual. Contact Toro for details.

CHAIN OILER See Figure 18. ? Use Premium Bar and Chain Lubricant. It is designed for chains and chain oilers and is formulated to perform over a wide temperature range with no dilution required. ? Remove the cap and carefully pour bar and chain lubricant into the chain oiler tank. ? Replace the cap and tighten securely. ? Check and refill the chain oiler tank every hour when using an electric power head or every time the engine is fueled when using a gas power head. NOTE: Do not use dirty, used, or otherwise contaminated lubricants. Damage may occur to the oil pump, bar, or chain.

The blades should be a simple bolt on, how ever there are no adjustments at the blade. Your adjustments are on the swing brackets that raise and lower the deck.

at end of cable is a threaded section and nut adjust to ur comfort

Try this. Should work.

www.mickman.com/irrigation/tips/toro600.html

There is an adjustment for the chain. There is a sproket that you can loosen and adjust. You should be able to get it from the outside of the machine. Should be a 1/2in or 9/16in nut.

To adjust the self propel cable, loosen the cable
clamp, pull the cable downward to remove all the slack
then push the cable jacket up 1/8”
and secure with the cable clamp
good luck