Convert LP Lincoln oven Impinger II series 1700 to natural gas series 1600

SOURCE: lincoln impinger pizzaoven

could be a defective pot or loose opitical encoder

SOURCE: Lincoln Conveyor Oven - 1132

Switching phase on products are usually up to UL. You need a good tech and it can be done. If it is marked 3 phase and you make a single, the responsibility falls on the person that did the conversion. Components should be similar from 3 phase to single, just use OEM parts!

SOURCE: Conveyor oven motor won't start

does the motor have a start capacitor. It could either be that or it could also be the control board. Good luck :)

SOURCE: Hi -- I have a double

Usually the first error code will indicate that the temp. sensor in the oven has failed. (the long wire-like device) Since it is one of the cheaper parts and generally easiest to procure and install, try replacing it first. Good luck, Dale

SOURCE: Hi, my daughter has an impinger lincoln pizza

First you should check the ac source of the unit if their is a power try to use some device to confirm that there is an ac supply like charger or electric fan, if there is power to the source then you should check the fuse if not busted or if it using a breaker try to turn it of then turn it on it may be defective sometimes the contact of the breaker is not properly contacting to each other this hopping that this may help you. thank's