AEG Lavamat Turbo 12830 - error code E20

E21 means a blockage in the drain pump.
I would check the impeller spins freely. A coin from a pocket can cause that error as it gets stuck in the impeller.

Lavamat?! Where in the *&%^ is this machine from? Yugoslavia! I'm guessing it will not allow water IN Because only the Spin (Centrifuge) cycle works?! So if that is so you need your water inlet valves replaced, there are Two. Even in machines named after a Bar of Soap!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Sounds like need pump replacement

I Have AEG Lavamat 76810 E70 7 Beeps and Beeps never stops

The water was not hot
I took all the multi-plugs out and put them back in the whole machine ALL CONNECTORS
Now it works fine E70 is gone

As your other posting ;-0)
John C

Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

dgmj

can anyone tell me how to remove the rear panel of a AEG lavamat dryer. regards Roy

On 40c wash hit E20 error so moved programme onto long spin and all ok!

erroe e20

I had the same problem (E20) for a long time and tried everything in the manual before I called AEG to have someone stop by and fix it.

He took the whole top off as well as the back and pulled out all this fuzz that was stopped somewhere. He said it normally comes from using too much detergant and also from not letting the machine run empty every now and then....but it doesn't say to do this in the manual. And anyway, I can't imagine that using too much wash powder made 1/2 kg of fluff.

I still have a guarantee on the machine, but they say that because it is my fault that I got E20 I have to pay for the repairment myself.

I actually think that they build the machine purposly in this way to keep up the money flow. I have an attorney on the case now.