I have a spwd 1800 washer dryer combo and it doesnt dry all the time whats wrong

I would suspect a problem with the control unit assuming you are properly setting it.

Search Results

How to repair a KENMORE double decker washer&dryer ...

? 4:59
www.youtube.com/watch?v=Rc_ZGugYBTY
May 31, 2014 - Uploaded by MrProductionist
How to repair a broken dryer belt from a Double Decker Washer and Dryer. ... I have a Kenmore stackable Washer-Dryer, and the dryer belt is ...

It means something is wrong with door lock mechanism.im currently having same problem.

Unfamiliar with these machines. The dryer portion probably works like any other condenser dryer so that means it has a condenser which is used to remove the water from the warmed air. If the condenser is clogged and in need of cleaning the drying mode will suffer. The lint filter should also be cleaned. Like I said I never even saw one up close.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Check things like the Filter / clear fluff...Make sure outlet hose if any is not kinked and passing air..Hope this helps..

I just contacted Samsung Tech Support for my wash/dryer combo WD-J1255C.
The reply.."it is not a full dryer ...and it is not sold as a full drier.. and don't expect it to be completely dry". I queried why it is advertised as a dryer and got the same reply.
Its a great washer but why did I pay extra for the dryer combo?

check the duct work going out of the house if it is clogged the clothes wont dry. Birds love to build nest in a open dryer vent and if you have any bends lint will build up get these clean and it should get you drying again
let me know what you find
bill

my Hotpoint dry will not dry my clothes. It will run for hours and the clothes still haven't dry just felt hot.

This machine has selfcondensing system. The condense water is beeing pumped out with the cooling water. The watertap MUST be open during drying. It also may be caused of overloading. The most W/D combos is just able to dry just the half of a full load in one time.

I think all you have to do (that's how I do it anyway), is turn the program knob so that the line is at the beginning of the drying stage (the little 'sun'), having first of course chosen the desired amount of drying time with the knob on the far left...
Hope this helps, good luck...