Heating & Cooling Logo

Related Topics:

A
Anonymous Posted on Oct 22, 2017

I have a polar wind portable air conditioner/dehumidifier/fan with swing louvers model # MPN4-12CRN1-BH8 I cannot get the protection code P1 to go away do you have any suggestions? When I first plug it in it has 8.8 in the viewing window then it goes to P1. It has done this since it was new. I cannot ding another one can you help? Thanks Beth

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on May 23, 2009

SOURCE: i have an Everstar air conditioner model R51I9/BGCE. the air conditioner stopped and the LCD indicates "P1". please help. also the water indicator light is on, where is the water tank?

Usually means that you need to empty the water reservoir, or that the bucket is not seated properly.

Ad
co7196

Ned C Cook

  • 3433 Answers
  • Posted on Sep 24, 2009

SOURCE: About the Polar Wind Portable air conditioner:

Have you chk'd the head pressure of the condensor?

Anonymous

  • 4 Answers
  • Posted on Jul 14, 2010

SOURCE: My unit has a P1 error and has stopped

Pull out the water container. Make sure the black floater switch is not stuck or impedes from working properly. If this doesn't work, need to look at replacing this

Anonymous

  • 1 Answer
  • Posted on Sep 04, 2010

SOURCE: danby dpac7008 portable air conditioner

how do u turn on a silhouetto dandy floor air condition

Anonymous

  • 1 Answer
  • Posted on Jun 09, 2011

SOURCE: Parts for Amcor Portable Air Conditioner

need a window kit for amcor kf9000e.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I opened flap on split system with two clean filters when I shut them monitor was flashing on 21 and can't turn it off have to turn off at main power and remote doesn't register the model is

Did this just get installed? Is the remote set up? Is the remote locked. Error codes for this model start with E or P. Like E4 or P1. 21 would be temperature in celcius. The remote has a slide on the front when slid down exposed a bunch of control buttons for timer settings, louver swing, clock and a lock button that shuts the screen off.
0helpful
1answer

What does the "swing" button do on the soleus ac/heat remote control?

The swing button on the unit itself turns on the horizontal oscillation of the louvers. The remote's swing button adjusts the speed of the oscillation. In the fan mode, it lets the Soleus Air Conditioner circulate more air.

Home Depot has the manual for Soleus PH3-12R-03 here: http://www.homedepot.com/catalog/pdfimages/d4/d4382c05-2692-4075-a254-fdcdef6dc1fb.pdf . The buttons are the same across the units.

I hope this helps.

Cindy Wells
0helpful
1answer

Mec portable air condition shows E5 on the screen after i on the air cond about 15-30minutes. Once it showed E5, cool air was not feel but just like fan air. what is the problem?

MEC portable aircond show P1 after on in a 1 and half hour. Once it showed P1, cool air was not feel but just like fan air. what is the problem?
1helpful
1answer

My LG art cool a/c blades in the vent arent swinging (from left to right)as i keep pressing the swing key on the remote.. please help

In some models, there are swing and sweep motors. Swing will work the vent up and down. Sweep or air flow motor will work for louvers left to right. If sweep motor not works replace the motor. If no sweep motor option, you have to direct by manual only. Be care ful, when you are doing manually, switch of the unit. Thanks.
6helpful
3answers

Beaumark portable air conditioner operation

Beaumark air conditioners are made by GE…head over to their site and download a manual for their air conditioners - they are very similar.
http://products.geappliances.com/ApplProducts/html/GEAResults.htm#Category=Window_Room_Air_Conditioners
10helpful
3answers

Polar wind dehumidifier: p1 or p2 code after emptying tank.

P1 error indicates that:
  1. The water tank on the side of the unit is full.
  2. The water tank in not properly seated in the housing.
  3. The switch at the back of the water tank housing is not engaged or is loose
Not finding what you are looking for?

808 views

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...