Can you help with making our DVD Recorder VCR multi region...our model SANYO HVR-DX625HB Thanks Tony New Zealand

Do you mean MULTI REGIONS?
You can try some reading here:
http://www.videohelp.com/dvdhacks/sanyo-hv-dx350a/7660

http://www.mydigitallife.info/2007/01/14/unlock-sanyo-dvd-player-multi-region-code-unlocker-hack/

Please leave rating if it helps.

hmmm..well...let's see what we're up to here..do you have the user manual, or do you need that?

Shall tell you if you would like to tell me how much you would like to pay for my answer.

If DVD disc was purchase in New Zealand the region code is Region 4, if the Panasonic unit was purchase in the US it only plays DVD disc with region code "Region 1 and ALL". This information is found on the back label of the disc that has the code on the globe.

goo day,

yes there are code that you can use to open the region of your DVD player to play multi region disc. But your supplied remote can not do the job. Normally I use factory service remote to free the region of all panasonic DVD player.

The only thing you can do is ask a help from a qualified service technician, I may reffer you to "Next electronics" this is electronic service center within newzealand and ask them if they can convert your DVD player to play mullti region disc. If only your close to my place i would defenitly help your problem.


cheers,
mark

please try this
open tray
press 98790
OR
Keep Tray in eject position

Press Setup from remote

Go to preference page

Press"138931"

Using Navigation Key chane region code to "0"

Press "OK"
hope it helps!

I think there should be options that allow you to protect the disc or not. Check your settings.

the dvd is multi region. Therefore, you do not have to change it:)

1. Press the 'Set-up' button on the remote control
2. Select the 'System Info' mode from the on-screen menu
3. Using the remote control 10-key type in '1101'
4. 'Region code' should appear as an option on the 'System Info' menu. Initially the region code will be set to 4 (depending on your country). Press '0' on your remote control using the 10-keys to set to multi-region.
5. Press 'OK/Enter' on the remote control.
6. Finish by pressing the 'Set-up' button once more.

Multi region? You should just be thankful it works.
The 3510 is the worst machine i've ever come across!