Hello, just got the first issue after using AEG Lavamat 86800 for over 3 years.
When I start the washing cycle, it ends up after few seconds displaying directly "Drain 0 0" just like it is done with washing. It gives no error codes.
It will be appreciated if anyone has good suggestions, Thank you
SOURCE: My washing machine AEG lavamat
1) Hold in the Pre-wash & soaking buttons TOGETHER;
2) At the same time, turn the knob clockwise from the OFF position, to "Short Spin". All the LEDS light up.
3) turn the knob anti-clockwise to "energy saving"
4) Machine is reset and the door release clicks.
Switch your machine off and then back on again.
326 views
Usually answered in minutes!
×