Hello, My W50 Cybershot has a Flash error coming up after my wife accidently dropped it on vacation. When I have it on and shooting photos, it constantly has the E:91:01 error flashing on the screen. I have tried to initialize the camera and it always comes back after a few seconds. Thank you in advance for the help. L. Kansas. E:91:01 flashing
Press Menu button
togle across from REC Mode to setup
togle down thrice from camera to setup 1
togle across into sub menu
togle down from four times to Initialize
togle across again to the sub-menu
togle up from cancel to OK
press center button to accept the OK choice
Screen changes and so press okay again
It should restart the camera
Opening on the 'Clock Set' screen
togle down to cancel and use the camera and make sure that you have the camera to flash, if it works try again in the Auto function.
If it is still not working do not worry follow the steps again two or three more times, As this is generally a software error message and not a hardware malfunction.
If it is working then don't forget to set your Clock.
Hi
From what I know from running a digital camera repair shop, even if you replace the flash you will have to clear the error message from the camera. This takes a special cable and software... you can make the cable yourself and get the software online for free but I can't post a link to it sorry.
If you search e:91:01, the listing for "agoraquest.com" has a detailed post about how to do it.
You can try switching out the flash for a working one and hope that it clears the error message, you might be ok, won't know till you try.
Good luck from Darntoothysam com
Thomas
808 views
Usually answered in minutes!
I made inquiries about it to SONY customer service center just now, it needs to repair, and it costs 10.000yen($104)
The flash does not work. I have initialized it but it still does not work.
Sony DSC-W55 Flash Error code-E:91:01
×