Top 20 Sunpentown WC-30U Under-Counter Wine & Beverage Cooler 32-bottles NEW Questions & Answers

Here is a link to the manual. I hope it helps, because it says nothing about putting on handle. Maybe pics will help.

Sunpentown... | 51 views | 0 helpful votes

You should refer to the user manual to help you troubleshoot your equipment located Here:
I hope this helps!
Good Luck!
Rich Lilja

Sunpentown... | 646 views | 0 helpful votes

Check for sediment or debris in sump.

Electrical... | 40 views | 0 helpful votes

The more breaker space, the better provided panel mounting space is available.

Main two pole breaker in the panel examples:
40 amperes ( 40 x 240 is 9600W),
35 amperes ( 35 x 240 is 8400W),
30 amperes ( 30 x 240 is 7200W).

You can fit your 8000W power supply preferably into a 30A/120/240V panel, or a 35A/120/240V.

Try to keep the loads balanced. There are two 120volts lines, each, line voltage to neutral, and 240 volts line to line. Example, two 120 volt loads, 1500watts each, connect one of the loads to one lone and the other load to the other line so that each of the 120 volts lines has a load of 1500 watts avoiding both 1500 watts loads (3000W) from being connected to just one 120 volts line while the other 120volt line has no load. This is "balancing the load".

Product of volts and amps is watts. Transposable,
Watts divided by volts is amps.

Electrical... | 105 views | 1 helpful votes

Really need more info! If this is came from Harbour Freight, check the spark plug. I watched a video to get a little background on the generator and the recommend changing the spark plug before using it. Anyway, he opened box and pulled the wire off the plug and was able to unscrew the plug by hand. I doubt your plug is loose if it has ran, but probably be in your best interest to change it, I bet it's bad. He said the gap is .03. Take spark plug out and go to any automotive store and get a replacement, they'll even gap it for ya.
Check and make sure there's fuel in it, switch/key is in the on position, press primer button at least 8 times if it has one (didn't see one in video), crank a few times in full choke, then on half choke, and it should start.

Electrical... | 99 views | 0 helpful votes

If you plan to purchase diesel generator set in future, please visit for your reference.

Electrical... | 80 views | 0 helpful votes

Not 100% sure but I suspect the LED replacements exhibit a significantly higher impedance when off, unlike incandescent and halogen.

If you have multiple cans controlled by one switch, try changing all but one to LED and likely there will be no flicker at the lighted switch.

If you leave at least one halogen on the circuit and it still flickers, be sure to comment here and I'll research further.

Electrical... | 26 views | 0 helpful votes

Oh, it's there... you just cant see it. It has likely come loose and moved.

Suggest it's time to replace the disposal.

Electrical... | 81 views | 0 helpful votes

Before you pick the PHP Crude generator, check, if the application is robust enough to develop the best CRUD management dashboard, and if the application feature a simple and user-friendly interface. Most importantly, you need to consider, if the application comes within the most reasonable rates, and if the developer offers the most effective assistance to the users. These considerations will make it easier to pick the application that can simplify the crud operations and thus, save ample of time and effort. With these best applications, you can certainly overcome the usual hassles that comes up in the path of CRUD functions.

Get more info visit

Electrical... | 79 views | 0 helpful votes

If you need to buy new diesel generator set in future, maybe you can visit:, or contact us (

Electrical... | 42 views | 0 helpful votes

Hello, contact your supplier, in generally, they supply spare parts of power generator. But if you still want to purchase other type diesel generator set , please visit at

Electrical... | 29 views | 0 helpful votes

The carburetor will need to be removed and replaced with the appropriate vaporizer.

Electrical... | 44 views | 0 helpful votes

Here is some reasons for reference:
1.After the diesel generator is stopped, the residual magnetism is often lost, because the material used for the magnetic pole of the exciter is close to the soft steel, and the residual magnetism is small. After the shutdown, when there is no current in the excitation winding, the magnetic field will disappear.
2.The magnetic pole of the diesel generator loses its magnetic properties.
3.Damage of excitation circuit components or circuit breakage, short circuit or grounding phenomena.
4.The exciter brush is not in good contact with the commutator and pressure of brush holder is insufficient.
5.Excitation winding wiring error, opposite polarity.
6.Stator winding and rotor winding of generator set open circuit.
7.Poor contact between diesel generator brush and slip ring, or insufficient brush pressure.
8.Diesel generator lead wire wiring is loose or switch contact is poor.
9.The fuse box is fused.
10.The "auto-manual-de-excitation" switch on the control panel is in the de-excitation position (automatic generator set has "auto-manual-de-excitation" switch).
11.The voltmeter is damaged.
12.Rotary rectifier module is damaged.

Electrical... | 85 views | 0 helpful votes

If you more help or purchase diesel generator set, please visit at

Electrical... | 44 views | 0 helpful votes

Diesel generator set:

Electrical... | 86 views | 0 helpful votes

Not finding what you are looking for?
Sunpentown WC-30U Under-Counter Wine & Beverage Cooler 32-bottles NEW Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Sunpentown Electrical Supplies Experts


Level 1 Expert

47 Answers

John Trevino

Level 3 Expert

1420 Answers


Level 3 Expert

2223 Answers

Are you a Sunpentown Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sunpentown Electrical Supplies

  • Sunpentown Electrical Supplies

Most Popular Question

put handle

  • Electrical Supplies