20 Most Recent Sunpentown WC-30U Under-Counter Wine & Beverage Cooler 32-bottles NEW - Page 5 Questions & Answers


Hi thers a rectifier bloock in shaft at rear of alternator easy to desolder an replace an easy obtained making sure polarily is kept the same as if incorrect dc won't pass to rotor to energize

Electrical... | Answered on Sep 22, 2019


You should turn off the remote emergency switch. Then check the reasons, but this is based on that you can not turn off the switch.
Electromagnetic valve for generator set shutdown is out of control.
Speed regulator of diesel engine has fault.
Operational errors may be that the control panel first breaks the key switch and then presses the stop button.
There are many reasons besides above reasons, you should check clearly and remove faults one by one, then will know what is the resaon.
We also supply Cummins diesel generator, if you need to have a new generator, please conatc us: sherly@dieselgeneratortech.com.

Electrical... | Answered on Sep 21, 2019


What is the situation when the generator wont start? Hope you can say details.
Reason:
Air intake port is blocked.
The fuel is not enough or the quality of fuel is poor.
Fuel system and injection system failure
Above reasons are only some parts of many reasons, you need to remove the faults one by one.
If you still can not resolve the problem, please contact us: sherly@dieselgeneratortech.com, we not only generator manufacturer, but also provide generator technology supports.

Electrical... | Answered on Sep 21, 2019


If you need to have a new diesel generator set, please contact us by this email address sherly@dieselgeneratortech.com

Electrical... | Answered on Sep 21, 2019


You do in good job.
If you want to learn more about diesel generator set technology support, or if you need to purchase diesel generators, you can contact sherly@dieselgeneratortech.com, we can supply Cummins, Volvo, Perkins, Deutz, Ricardo etc. diesel generator.

Electrical... | Answered on Sep 21, 2019


Is it diesel generator? Because i do not know Onan 3600 lp generator much. If it uses diesel fuel to drive, maybe you can reference some reason:
1.The fuel pipeline has air, and the fuel can't keep up with it. Solutions: Remove fuel and air according to instructions.
2.Air intake is insufficient or intake pipeline is blocked.Solution:check the intake pipe of the engine and replace the filter if necessary.
3. There is no oil in the tank or the oil valve has not been opened. Solution:Check fuel level of the fuel and fuel valve.

Electrical... | Answered on Sep 21, 2019


You can buy our Professional Generator Wheel Kits and Spares on our site.
https://www.generatorguru.com/wheels-and-wheel-kits/

Kind regards
The Generator Guru Team
generatorbadback-yvhi3wxpq4zyabcrzo2wizws-1-0_1.jpg

Electrical... | Answered on Sep 20, 2019


You can buy our Professional Generator Wheel Kits and Spares on our site.
https://www.generatorguru.com/wheels-and-wheel-kits/

Kind regards
The Generator Guru Team
generatorbadback-yvhi3wxpq4zyabcrzo2wizws-1-0_0.jpg

blankgen1280-yvhi3wxpq4zyabcrzo2wizws-1-2_0.jpg

Electrical... | Answered on Sep 20, 2019


It should work. The load is less than 8 amps and the supply a good 15 amps.
Try starting the fan before lowering the cooling. This prevents all three motors in the ac from staying at the same time.
Otherwise, there is a problem with the equipment.

Electrical... | Answered on Sep 15, 2019


Google (king)(KCG-8500)(manual) without parens OR contact King directly to request it.

Electrical... | Answered on Sep 13, 2019


Hi

We actually hold parts and service kits for this range: https://www.generatorguru.com/ryobi/
We also have videos on how to service them: https://www.generatorguru.com/help-me-fix-my-generator-repair-advice/

If you need any help please let us know via the website.
www.GeneratorGuru.com
image-yvhi3wxpq4zyabcrzo2wizws-5-0.jpg

Electrical... | Answered on Sep 13, 2019


Hi
I assume that the generator has an electric starter and if not, a manual pull to start cord.
Here is a few things you need to check

1* Check your fuel filter
2* Check ignition with an ignition tester or remove plug to verify spark and if you have iginition ...
3* check carburator if it has one. Carburetors are inexpensive and can be ordered on line at reasonable price.
4*Check your oil level and your pressure switch which may be interlocked with the ignition system; maybe, check it anyway.
5* lastly, ignition coil as stated before, test it

Electrical... | Answered on Sep 09, 2019


maybe it needs to be reflashed. see you tube for how to videos

Electrical... | Answered on Sep 06, 2019


is anything plugged into the gen when you reset it?
If so unplug everything and try again.
If not, it is an internal problem with the inverter.

Electrical... | Answered on Sep 06, 2019


probably==varnish from gas sitting too long or fuel filter.
I was able to get past this on one of my machines by using starter fluid and keeping it running for a minute or more until it cleaned itself. YMMV. Otherwise, it is a disassemble/clean project.

Electrical... | Answered on Sep 05, 2019

Not finding what you are looking for?
Sunpentown WC-30U Under-Counter Wine & Beverage Cooler 32-bottles NEW Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Sunpentown Electrical Supplies Experts

rlev_7

Level 1 Expert

47 Answers

John Trevino

Level 3 Expert

1420 Answers

wadingriver
wadingriver

Level 3 Expert

2223 Answers

Are you a Sunpentown Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sunpentown Electrical Supplies

  • Sunpentown Electrical Supplies

Most Popular Question

put handle

  • Electrical Supplies
Loading...