20 Most Recent Sanyo DS31520 31" TV Questions & Answers

0helpful
2answers

TV picture flickers

If your DVD player is separate from your tv, you might have a loose cable plug or connection. Depending on the type of flicker you have, a vertical circuit loose connection would cause this. If you could connect it to a cable or antenna it might tell you where the problem is located. A faulty circuit in the DVD might cause this too. Stargazer
7/29/2021 9:36:55 PM • Sanyo DS31520... • Answered on Jul 29, 2021
0helpful
1answer

May schematic diagram tv sanyo model st-21se1

Send your email ID to me by Fixya, and get back a copy of the schematic by return mail.
10/4/2019 5:39:59 AM • Sanyo DS31520... • Answered on Oct 04, 2019
0helpful
3answers

Sanyo tv making high pitch noise from loose cable connector

The noise is coming from the fly-back transformer. By moving the cable connector you move the main board. Unplug the TV and remove the back. The transformer has a red wire going to a rubber cup at the top of the picture tube. Looking at the transformer you will see a dough nut shape with a metal piece going through it .. Drive some tooth picks between the dough nut and the metal core. That should reduce or stop the ringing.
5/7/2019 11:46:06 PM • Sanyo DS31520... • Answered on May 07, 2019
0helpful
1answer

How do I change my tv to hdmi

Does not have hdmi so you can not http://tv.manualsonline.com/manuals/mfg/sanyo/color_tv_model_no_ds31520.htmlYou can use one of thesehttp://www.ebay.com/sch/i.html?_from=R40&_trksid=p4712.m570.l1313.TR12.TRC2.A0.H0.TRS0&_nkw=hdmi+to+component&_sacat=0
1/17/2016 2:10:35 PM • Sanyo DS31520... • Answered on Jan 17, 2016
0helpful
1answer

I don't have a remote and I need to get it to video setting

Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites Check this site too. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.
12/11/2015 8:43:24 AM • Sanyo DS31520... • Answered on Dec 11, 2015
0helpful
1answer

Where is the reset button

Sanyo Service Menu - Factory-Reset.com

factory-reset.com/wiki/Sanyo_Service_Menu
Jump to Sanyo TV Service Menu Method 2 - Unplug the power cable. Press and hold the {VOL -} button on the TV while plugging the power cable back ...

Sanyo TV reset button location? ' Yahoo Answers

https://answers.yahoo.com/question/index?qid...
Jul 27, 2007 - Does anyone know where to find the reset button on a 32" Sanyo TV? The thing is just totally dead and I am thinking maybe if I push the reset it ... I have a Sanyo TV, I accidentally hit the reset button twice. I ... Aug 6, 2012 36 inch sanyo tv won't change off video 2? Apr 17, 2010 I accidentally hit the 'reset' button the remote of my sanyo tv ... Jan 6, 2010 Sanyo DS32224 TV Problem!!? May 21, 2009 More results from answers.yahoo.com
11/29/2015 9:26:42 PM • Sanyo DS31520... • Answered on Nov 29, 2015
0helpful
1answer

The Remote goes only to ch 9

The main system control memory I on the main board of the TV is faulty. Replace it. If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
7/4/2015 1:31:57 PM • Sanyo DS31520... • Answered on Jul 04, 2015
0helpful
1answer

How do stop my TV from changing channels on its own

Do a hard reset to this set, and check. If it do not help you, the main system control memory IC to this set is faulty; and should be replaced. There are two types of reset to TVs. The first is simple to do; a Hard Reset; and the other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
1/30/2015 1:09:18 PM • Sanyo DS31520... • Answered on Jan 30, 2015
0helpful
1answer

It keeps going to stand by

Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
1/27/2015 2:06:26 PM • Sanyo DS31520... • Answered on Jan 27, 2015
0helpful
1answer

I need a remote for a 27" sanyo tv

You have to post the exact model number of your TV to check is it possible to get the particular remote. Electronics Equipment Repair Center
12/20/2014 2:50:03 AM • Sanyo DS31520... • Answered on Dec 20, 2014
0helpful
1answer

How do i widen my sanyo t.v. screen from my computer

Change the "Aspect Ratio" in your device drivers for the video card. Windows usually only offers resolutions within that aspect ratio.
12/1/2014 5:57:50 AM • Sanyo DS31520... • Answered on Dec 01, 2014
0helpful
1answer

How do I change video screen to channel 3 without remote

If there is a source selector button [TV/Video]; at the front panel controls at the TV; you should have a remote control to select the input source to TV. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.
10/4/2014 5:38:31 PM • Sanyo DS31520... • Answered on Oct 04, 2014
0helpful
1answer

Black color rigth side and black color lower crt tv 21 inches

onida black 21 inch displaying enter password please help me
4/20/2014 11:58:26 AM • Sanyo DS31520... • Answered on Apr 20, 2014
0helpful
1answer

No sound

Check its speaker first. Check whether the audio is muted. Gopakumar Gopalan Google
3/3/2014 6:25:26 AM • Sanyo DS31520... • Answered on Mar 03, 2014
0answers
Not finding what you are looking for?
Sanyo DS31520 31" TV Logo

315 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sanyo Televison & Video

  • Sanyo Televison & Video

Most Popular Question

keeps going stand

  • Televison & Video
Loading...