20 Most Recent Brother Sewing Machine LB6800-PRW Project Runway Embroidery Machine Questions & Answers

Please understand that you are talking to regular people who offer advice, not to the company that made your product. Contact the seller of your item directly for their return policy

Crafts & Hobbies | Answered on Nov 02, 2019

Yes you can. You need a cable that will go from your machine to your computer. It's usually just a simple printer cable. Then you have down download some software from Cricut.com called Cricut Craft Room. Then you should be good to go. :)

Crafts & Hobbies | Answered on Oct 29, 2019

Loosen the screws on the clamp holding the blade and slide the blade out sideways using an offcut of timber. If the mahine has been abused or neglected, the blade may be in pieces. Reverse operation to mount new blade. Oftentimes the is deformation of the and that may have to be replaced also.

Crafts & Hobbies | Answered on Oct 22, 2019

There are over 40 variations of the B&D planer, there will be four or five screws holding the two parts of the body together, take phots as you go then you can put things back in reverse order. If you want parts try https://www.toolsandpartsdirect.co.uk/spare-parts/black-decker-spare-parts in the UK. good luck, it's not too difficult.)

Crafts & Hobbies | Answered on Oct 22, 2019

From this website
MAINTENANCE Clean as needed with a soft, dry cloth. If needed, use a damp cloth with mild household soap. Note that color may vary from candle to candle, and color may fade over time.
Use dish liquid.

Crafts & Hobbies | Answered on Oct 20, 2019

Check to see if the blade installed correctly

Crafts & Hobbies | Answered on Oct 18, 2019

You need certain basics to get started making your own jewelry such as thread cord, pliers, clasps, jump rings, ear wires and cutters. But it depends on the type/ style of jewelry that you are hoping to make as to what else you will need. Get advice from a beading shop.

Crafts & Hobbies | Answered on Oct 15, 2019

replaced printer controller board or cable along printer controller to CPU board

Crafts & Hobbies | Answered on Oct 15, 2019

Found VIA GOOGLE. Hope it helps.2d61e69a-2fe8-4af2-a909-74dd5b1b93b4.png

Crafts & Hobbies | Answered on Oct 14, 2019

I had an issue with these before, put a dime under the front middle of the base, it should fix it, if its the same problem i had. can you tilt it and will it work? sometimes when the base is not flush this tends to happen.

Crafts & Hobbies | Answered on Oct 12, 2019

Here is a great blog on how to change a glue gun nozzle. But big things to remember, preheat the gun, use gloves or a wrench and be careful! If you don't preheat your glue gun, you are likely to strip the nozzle and then be unable to use it again and may even break the gun. Hope this helps!


Crafts & Hobbies | Answered on Oct 02, 2019

Not finding what you are looking for?
Brother Sewing Machine LB6800-PRW Project Runway Embroidery Machine Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Crafts & Hobbies Experts

R.A. Ellis
R.A. Ellis

Level 3 Expert

12731 Answers

ray gallant
ray gallant

Level 3 Expert

64733 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Brother Craft and Hobby Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Brother Crafts & Hobbies

  • Brother Crafts & Hobbies

Most Popular Question

making loud noise like machine gun

  • Crafts & Hobbies