Top 20 Timex 1440 Prizefighter 53032 Sports Wristwatch Questions & Answers

Time and date setting
are only necessary if automatic setting by radio broadcast is unsuccessful.
To set time, date, and options:
1) With time and day showing, press and hold SET.
2) City code flashes. Press START/STOP to select city that represents your time zone. See table below
for city codes.
3) Press MODE. DST (daylight savings time) setting flashes. Press START/STOP to select AUTO (obey
setting in radio signal), ON, or OFF (disregarding setting in radio signal for ON/OFF).
4) Press MODE. Hour flashes. Press START/STOP to change hour (including AM/PM); hold button to
scan values
5) Press MODE. Minutes flash. Press START/STOP to change minutes
6) Press MODE. Seconds flash. Press START/STOP to set seconds to zero.
7) Press MODE. Year flashes. Press START/STOP to change year.
8) Press MODE. Month flashes. Press START/STOP to change month.
9) Press MODE. Day flashes. Press START/STOP to change day.
10) Press MODE. Date flashes. Press START/STOP to select M-D (month-day) or D-M (day-month) format.
11) Press MODE. Hourly chime setting flashes. Press START/STOP to select ON/OFF. When ON is
selected, watch chimes on every hour.
12) Press MODE. Button beep setting flashes. Press START/STOP to select ON/OFF. When ON is
selected, watch beeps for every button press.
13) Press SET, at any step, when done setting.
Press and hold MODE to switch between 12- and 24-hour time format.
Press SET to view date. Year is at top of display and date is below.
Press RECEIVE to view current city.
Press and hold RECEIVE to begin manual reception of time signal, as described in ATOMIC CLOCK
SYNCHRONIZATION section.

(from the User's manual)

Buttons are numbered as followed:
Start/Stop is button 1
Lap/Rst is button 2
Indiglo is button 3
Mode is button 4

a) Press 4 to select "TIME" mode
b) Press 2 and hold for 2 sec to select "SET" mode, second digits blink.
c) Press 1 to reset digits to 00.
d) Press 4. Minute digits blink
e) Press 1 to set minutes.
f) Press 4. Hour digits blink.
g) Press 1 to set hours.
h) Follow same patter to set day of month, month, etc...
i) Press 2 at any time to retain set values and exit procedure

Hi williams,,, read the manual that came with your wrist watch

Buttons are numbered as followed:
Start/Stop is button 1
Lap/Rst is button 2
Indiglo is button 3
Mode is button 4

a) Press 4 to select "TIME" mode
b) Press 2 and hold for 2 sec to select "SET" mode, second digits blink.
c) Press 1 to reset digits to 00.
d) Press 4. Minute digits blink
e) Press 1 to set minutes.
f) Press 4. Hour digits blink.
g) Press 1 to set hours.
h) Follow same patter to set day of month, month, etc...
i) Press 2 at any time to retain set values and exit procedure

http://www.timex.com/info/Product_Instruction_Guides_Downloads

Hi,

Timex has two ways to find information about your particular watch. Some of these models only have a guide consisting of a few pages. If you don't have the manual, Try this link:

If your watch is the W-207 movement use this guide:
http://assets.timex.com/user_guides/W207_M115/W207_M115_NA_EN.pdf

Complete Timex link site:
http://www.timex.com/info/Product_Instruction_Guides_Downloads

Now, look up the model number, or if you cannot find that, check the three-digit Module Number from the back of the watch. Click on it in the Module Table, and download a PDF of your watch setting-instructions/manual.

I hope this helps you. Thanks, Bill

Hi,

A lot of users are having trouble getting this watch going. Timex has two ways to find information about your particular watch. Some of these models only have a guide consisting of a few pages. If you don't have the manual, Try this link:
Direct link for the W-207 movement:
http://assets.timex.com/user_guides/W207_M115/W207_M115_NA_EN.pdf

Complete Timex link site:
http://www.timex.com/info/Product_Instruction_Guides_Downloads

Now, look up the model number, or if you cannot find that, check the three-digit Module Number from the back of the watch. Click on it in the Module Table, and download a PDF of your watch setting-instructions/manual.
If you need further help, call Timex in Little Rock, Arkansas, phone 1-800-448-4639.

I hope this helps you. Thanks, Bill

Click on my name (escapement), then click on TIPS AND TRICKS. Browse through all and you will find the link to all TIMEX watch manuals. Rate me, please.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX .Rate me, please..

Hi,

I have the same watch, it is complicated. Here goes:
1. With the time and date showing, press the top left button.
2.Press the right top button (this sets seconds)
3.Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).
4.Press the bottom left button, minutes flash. Press the top right button until correct minutes.
5.Press the bottom left button, month flashes. Press the top right button til correct.
6. Press bottom left button, date flashes. Press the top right button til correct.
7. Press bottom left button, day flashes. Press right top button til correct.
8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm, press the top right button repeatedly until the CHIME or CH symbol is gone, then press the left top button. Repeat for alarm but watch for the bell icon or ALARM or ALM to disappear, then press the top left button.

I hope this makes sense to you.

You can get instructions from the Timex web site "timex.com".

At the bottom of the screen click on "manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals. Rate me, please .

To set the alarm, press the lower left button until "AL" appears.
Press and hold the center right button until the time digits flash.

Use top or bottom right buttons to set the time.

Press the center right when you have done setting the time.

Press the center left button to start or cancel the alarm.

The alarm will sound for 30 seconds; Press any button to stop.

Te alarm will repeat daily until it is turned off.

http://www.timex.com/info/Product_Instruction_Guides_Downloads

Use the numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps
R/
David

When looking at the face, you have 4 pushers. Top left is for regatta function countdown. Top right is regatta function start-stop-reset. Bottom left is Hours-Minutes and Nite Lite. Bottom right is regatta function "catch up". Assuming that you want to set Hours and Minutes, press and hold the bottom left for 3 seconds...Hours will start blinking, press the pusher successively until the desired hour is reached. Then wait until it stops blinking. To set minutes, press and hold for 3 seconds, the hours will again begin to blink, then release and re-press for an additional 3 seconds and the minutes will blink, Then press successively until desired minutes have been reached. Stop pressing and wait until the blinking has stopped. Once it has stopped blinking your time has been successfully registered. Good Luck. Hope this helps!

joe WANT TO KNOW HOW TO SET THE TIME AND DATE ON A AQUASTAR WATCH# 3876.

just change the time from the menu...unless we're missing something here

timex.com. They have manuals and instructions for most of their stuff. Follow the links. jughead77.

Go to timex.com. Click on manuals/downloads. Next page scroll down to Digital. First item is 1440 Sports. Link will take you to the manual. Good luck. jughead77.

https://www.google.com/search?q=Timex+women%27s+T5K187+manual It looks like you will have to contact Timex direct as the manufacturer doesn't list a manual for it although they do have other Ironman models. ..