20 Most Recent Kenmore Elite 21082 - Page 3 Questions & Answers

Please click for support:Kenmore

See other post.

Had same problem mine was the yoke thatheld inner drum tobearing was broken. Lucky it was covered by Sears warrenty. Over $1,000 to repair without warrenty..

Need to reset the program and see if there is fault in the water line that does have a low flow and so the program cycle gets a error due to time taken for the rinse cycle.remove and clean the inlet and the drain pump and hoses.

I hope this answers the info you need. http://www.acmehowto.com/howto/appliance/washer/check/waterlevel.php

you either have to bail it out our remov e the hose at the pump and carefully drain it into a bucket. it could be you have a bad pump or a kinked drain hose.