2004 Honda VTX 1300 "1 engine wiring" Questions

...engine will be probably be idling very fast. Adjust both the idle screws equally from this point to get to the desired idle speed. SYNCHRONIZE THE CARBS Remove the air filter and rubber fittings to ...

...engine i doubt that one exists for a assembled bobber. but dude all you need are 3 wires on ignition switch 1 from the batt. 1 to the coil 1 to the lights if you want to rewire your bike (kick start ...

...3 phase ) look for 3 yellow or white wires coming out of the engine. check wire 1 to 2, wire 2 to 3 and wire 1 to 3. you should get numbers not OFL or OL if they all check good. replace the ...

...1 wire is IGN B+12 while the other would go to the CDI and should pulsate when cranking or engine running. Good luck and thank you for using FixYa. I broke my keys in the ignition on my 2010 ninja ...

...1 black -where do these go? Howdy: Your picture looks like a Vstar? The two wires under the seat go to the electronic module which is under the seat. Need to pull oass seat then driver seat. Look for ...

...1-2-4-3. There is no distributor for the engine, as ignition is controlled electronically. Extra Ignition Information: there are only two ignition coils for this engine. Each coil has two spark plug ...

...1/4 of the way it starts. What could this be? Start stop switch is doing what it is supposed to do. I cant find any bad wires You may have a break in the wiring loom around where it passes the ...

...TWO COILS TO WHICH PLUG The wires should have little numbered tags on them 1-4. Number 1 cylinder is the furthest to the left of the engine and continues in order to the right. It is not like a

Spark problem I noticed that the idle is a little rough. When I pull the spark plug wire out away for the plug a little, the engine revs higher. Put it all the way back and engine idles lower. If I ...

...box,a kill switch already wired up.please and thanx Hey Dave, I have a few questions.. 1. Does this engine run now? 2. Has this engine ever had electric start on it,,ever? please reply to ...