2000 Chrysler Grand Voyager "pull cable wont open bonnet" Questions

...pull bonnet catch and you push up and down on the bonnet whilst catch is being pulled. 1, cable possibly stretched, 2, look at bonnet catch under the coloum to see if wire is attached, 3, try and lie ...

...under the dash didn't do anything. The cable is still in place but wont pull at all. Help!!!!!!!!!!! try applying pressure to cable while a second person gently bounces the opening edge of the

...wont open the bonnet, the handle is ok still has the cable on, how do i open the bonnet?? Did you try with 2 people. one guy pushes down on the hood and then pulls up after the other pulls and holds ...

...in front of battery. must remover right front grill clips in place then work fingers in gap feel cable and pull gently till unlocks. once bonnet is open clip ratchet together and secure with tie ...

...pull the lever that the cable was attached too screwdriver wont work on a gen 6.. no way to get to mech as nosecone is all enclosed,, try pulling cable with plyers from inside.. fialing that you'll ...

cable inside the cab and have some place pressure on the bonnet as you pull, if not jack the car up and you can access the bonnet (hood) clip from inside it will be a cork screw shape more than likely

...pull the cable to both catches to get the bonnet up. I managed to do this from underneath. In my case the, left hand one was broken and right hand one was working, but the getting it open broke the ...

pull it. and the hood wont open The cable to the hood is most likely broken. The hood can be opened from underneath by pulling the cable and replacement is not terribly difficult once the hood is open

...pathfinder bonnet wont open cable is stuck Cable has probably broken or mortally bound-up. Does the release know pull out at all. If not, it's bound-up/locked-up. The latch itself may be the

my bonnet wont open on 1991 A4 audi the pulling mechanism inside car seems broken grab cable with pliers and pull until you get a replacement handle