2000 Chevrolet Silverado 1500 "replace 4 00" Questions

Ad

Question about Chevrolet Silverado 1500

1 Answer

...00 Chevy Silverado and recently replaced the rear brake line due to blown rusty one but i had to remove all brake lines going to the EHCU due to the transfercase and tortion bars in the way to get to ...

Ad

...00. That includes shipping. Jake Nothing to do with any fuse There is You Tube Video on the problem The dash panel has to come out & all of the lamps have to be replaced (soldered in) & the 4 ...

Ad

...replace some brake lines and i am unsure if i reconnected them back to there proper spot on the Unit i have 5 lines ... 2 from Master cylindar 1 driver front 1 passenger front and 1 rear brake line ...

Question about Chevrolet Silverado 1500

2 Answers

...4 cylinders misfiring on the same bank of the engine. DTCs P0171, P0172, P0174 or P0175 may also set for the misfiring bank. Recommendation/Instructions: If the published misfire diagnostic does not ...

00 bmw 323i chekc engine light is on and it's giving me codes for all 4 O2 sensors i replaced them and light comes on with the same codes when you turn off the car and turn it back on. possible fu

00 lods alero has little power when in drive and miss when ildeing in park quad 4 motor? if so ,bet on the module tower,they crack like a distrubitor cap would. If the tower is white ,it's factory

Question about Chevrolet Silverado 1500

1 Answer

...labels can usually be ordered from a local dealer. Fig. 5: 1996-00 2.4L (VIN T) vacuum diagram Fig. 6: 1998-00 2.2L (VIN 4) vacuum diagram I hope help with this (remember rated and comment this

replace  your ******   =  $ 1200.00  to   $ 1650.00  for a  rebuilt unit  with  a   18 mo  / 18,000 mile  warranty  

Question about Chevrolet Silverado 1500

1 Answer

...4:00 or 5:00. IF you can't find the marks on the cover, put the marks on the sprockets in those approximate positions and set the belt by using a belt tooth count between the marks. Cam to cam should ...

Question about Chevrolet Silverado 1500

1 Answer

replace the new solenoid, so I feel good about those wires. However, there was one remaining wire and I put it on the small nut on the solenoid in the 4:00 oclock position. Can you verify that this is

Not finding what you are looking for?
Cars & Trucks Logo

1,733 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...