1991 Chevrolet S-10 "distributor" Questions

How to change a distributor on a 1993 chevy blazor s10 4.3 vortec v6 Removal disconnect the wire harness on the distributor.remove the distributor cap.Bring the engine to top dead center on the number

Where is the wire located to put distributor in neutral to set timing on a 1997 Chevrolet S-10 4.3 Vortex? Distributors and the cap will only fit one way. Check out the videos in the link. https://www

...order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor

...NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed ...

...sensor problem - why would this come up now and what can I do to fix it I would verify that the distributor is in time. I had a customer with a similar problem, check engine light, and running ...

...parts stores can test these It does sound like the problem is related to the ignition coil and the distributor, or a loose computer ground wire (usually found at the rear of the cylinder heads), and ...

...positioning. I know that the firing order is 1-3-4-2 but how do I know which is which on the distributor cap? GET A PIECE PAPER DRAW A LARGE CIRCLE TOP UPPER HALF CIRCLE LEFT TO RIGHT WRITE ...

I have replaced ECM,spark plugs,fuel injectors, distributor, the cap rotor button, and it still want start please help! it ran at one time until this guy pull the distributor out i set it on TDC but ...

Crank Shaft Sensor for 2.5E 1991 Chevy S10 Cranks Fast but wont turn over has new coil and distributor you mean it cranks fine but wont fire? When you installed the distributor did you set it in ...

...if it rains the problem is back even if I did not use the truck.and the cap is not loose. check the distributor, there should have a seal ring where the cap goes. the ring should be inbedded in the ...