1991 Chevrolet C1500 "car gears details automatic" Questions

...automatic tranny is not shifting into 3rd gear. Fo a while it helped to turn the ignition off and restart but now that does not always work. Does this system use a vacuum modulator or would this be a ...

...plenty of time , money and mechanical / electronic knowledge the car will not have the wiring necessary for the automatic controls so unless you have all the requirements , trade it for an ...

car and you should shh the locking bar that stops the gear lever from being moved when the brake pedal isnt pressed have you any more details also is the battery dead when your trying to move it check

...car is now changing gears with a jerk please help This sounds like a linkage issue? Can you clarify a few details, have you removed gear box? And when you say it changing gears like a ####? Is it a ...

...does this happen? Does the engine run at all in a normal manner. Why can you not engage the clutch? If it is an automatic does it not let you move the gear lever etc. Please add the details and ...

...car company--chec bottle make sure--synthetic is bettr--can lower 50 deegrees--cud be the linkage--getta haynes manual for ajust details Yes it can be fluid issue,but still there are other ...

...operation to push oil through the bearings and gears causing over heating and failure towing details are in your user manual ask a specialist transmission shop best to put it on a small car ...

...automatic gear oil is ok, problem started when alternator was over charging, replaced alternator and battery and five fuses still will not change gear, chassis No KMJWWH7HPXU201905 tHANK yOU may hav ...

car go to put in gear and it dosent go i try all gears still wont move to put back in park position isnt real easy i dont have to force it but it dosent slide like it does thru reverse or drive or the

...car engine is cold, the drive position of gears will not engage immediately. The automatic gear controller will delay the shifting of gears until the engine is warm enough, as signalled by the engine ...