2007 Chevrolet Colorado (Extended Cab) New Cars "switches brake pedal chevy" Questions

...brake pedal and you will see your brake switch up along your brake pedal arm. It will either be between the brake arm and the firewall so when you brake it pushes the switch in. Or it will be between ...

where is the brake light switch on the chevy colorado 2004 is ti round or is it square can you sent a diagram of the location of the part brake switch is at the brake pedal

...BRAKE PEDAL POSITION SWITCH WILL SET OFF CRUISE CONTROL WARNING LIGHT.IF BRAKE SWITCH OKAY.THE DEALERSHIP HAS TO DIAGNOSIS AND FIX PROBLEM. Actually that's for the Tire Pressure Monitoring system. ...

the brake light fuse keeps blowing on my 2004 chevy colorado as soon as i touch the brake pedal brake light switch may be bad

...do not work! I have checked the bulbs and the fuse and they are all good. What should i try next? it is the brake switch on the pedal. the contact inside the switch is bad There is a Recall # ...

brake pedal I have the same issue. The brake lights on the tail won't work. The rear cab brake light does work. I've checked the fuses and replace the brake light switch. They still don't work. It's a

brake pedal is pushed. Sounds like your tail light board may be shorted,switch the board to the other side to see if the problem follows the board or stays on that side if so it could be a faulty turn

...brake pedal lever, back up under the dash... Replacement is normally easy also.. Good Luck... Mike This sounds like a Blown FUSE! Have you checked the Fuse Panel in the Dash for Blown Fuses? If none ...

...brake pedal mashed does not work. Slight pressure on rear of switch will allow to work. How do you keep switch stationary? Switch is clamped around booster rod and has clip installed. Switch is new. ...

...lights work when pedal is barely touched then go off when pedal is pressed harder Check your Brake Switch on the Back of your Brake Pedal, you have loose wires or your switch is not working ...