remove top cover,.tilt washer forwards, get someone to hold it for you, and fit belt round motor pulley first, then start feeding it round drum pulley, easing drum round at same time, it will be tight
...round "dial" to the front housing. Put down a bath towel on the floor and unscrew dial - then pull it out. Remove the front lower panel (3 screws on lower lip - lay on floor to see). Panel come right ...
remove top cover also. Put belt round motor pulley first and carefully feed belt round drum pulley, you will find this easier to do if you unhook the rear retaining spring. Please leave a fixya rating
...are usually located at the bottom front corner sometimes behind a hinged or removable panel. Look for a round or square flap or you may have to remove a long strip panel at the bottom at the
...remove wire clamp band round front of door seal. Undo 3 screws at bottom of front panel securing it to cabinet . remove front panel. Unscrew thye top wire clamp band securing the seal to drum front. ...
...Remove lower rear panel of washer. With the help of someone to hold it, tilt the washer forwards away from you at the rear. Fit belt round motor pulley first, and slowly feed it round drum pulley, ...
...Remove rear access panel. Slacken off the motor fixing bolts, and pull motor towards drum top. Fit belt round motor pulley first, and then feed it round the drum pulley from the rear of the washer. ...
Remove these screws. Take off the bottom front panel. With the panel removed, stick your arm up towards the handle. You will feel a plastic round lever, pull down on this lever, it will open the door
Remove top cover and lower rear panel. Tilt washer forward and get someone to support it for you. Fit belt round motor pulley first, and slowly feed belt round drum pulley, turning pulley at same time
493 questions posted
Usually answered in minutes!
522 Questions
457 Questions
272 Questions
222 Questions
251 Questions