Timex 1440 Nylon watch "set split time" Questions

...SET button. Press SPLIT/RESET button for STOP #1. Press START/STOP SET button for STOP #2. The stop time for #1 will now be shown. Press SPLIT/RESET button. The stop time for #2 will now be shown. ...

...SPLIT/ RESET SET SET CROWN COUNTDOWN TIMER A. Press MODE until TIMER appears. B. Press SPLIT/RESET to select timer operation (Countdown and Stop; Countdown and Repeat; Countdown and Start chrono). C. ...

split times, press the "Set/Recall" button while the watch is in Chrono mode. You can then scroll through the various splits with the plus and minus keys. Press "Set/Recall" again to exit display mode

...split/reset to set seconds to zero Press mode to select hours Press split reset to advance hour digits go through 12 hours to get to AM/PM Press mode to select minutes Press split reset to advance ...

...Set/Recall when done 6-To turn off an alarm just select which one and press start/split. Note: each alarms (1,2 or 3) have their own sound that cannot be modified unfortunately! Hpe it helped, ...

...set my new Fossil watch Model JR9455-300703 Finally i got it while playing around with my fossil JR9455. . . Here's the step by step method in setting the time: 1. press and hold light button and ...

...SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model. Press the "SET" button again. You are now done. All PM hours should be displaying ...

...SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model. Step 5Press the "SET" button again. You are now done. All PM hours should be ...

...set the 1st time zone, T1.) Press & release the lower right button on the face (START/SPLIT) twice, skipping the seconds. You should see the hours flashing. Press & release the upper right ...

...SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model. Press the "SET" button again. You are now done. All PM hours should be displaying ...