Kenmore Elite 21086 "water filter" Questions

...filter to the water pump. check the filter. it is in the water pump inlet assembly. unscrew the cover and pull the filter. it could be clogged with dirt and small particles. tnx 4 using fixya, ...

...water having been removed by removing the filter then select a spin cycle. At some point you should be able to see the pump start operating. If it doesn't there lies the problem. It's surprising what ...

...When the water flow finally stops, completely remove the clean-out filter. Inspect the clean-out filter, the drain hose from the tub as well as inside the pump impeller for any additional

...on the washer? Hello, it doesn't have a water filter. Now, there a screen on the hot/cold water valve side. It could be possibly plug from sediments front the city water source. ...

...bunch of towels or a good big plastic bag to collect water. Unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in carefully. Pl. rate me nice for the free

...filter to help contain whatever water you could not bail out by hand. Remove the drain filter and clean it thoroughly. Replace the drain filter, replace the lower front panel and run a rinse and spin ...

...filter drain knob enough to release water into the bucket. If your using a smaller drain catch (cooking pan, oil pan, etc) you'll likely need to close the drain knob and empty your water. 7) once all ...

FH error on display An FH error usually means low water flow into the washer. This can be caused by debris in the filters between the intake hoses and the washer, closed water valves, low water ...

...When the water flow finally stops, completely remove the clean-out filter. Inspect the clean-out filter, the drain hose from the tub as well as inside the pump impeller for any additional

...water. Unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in carefully. Next: You can use Affresh to clean your front loader. Deposits of soap and other such ...