Question about Kenmore Elite Washing Machines
...error code, then the SuD flashing. Cleaned out the soap container & inspected the inside (as stated on page 21 of "Washer Care") and ran a cleaning cycle. After 6-9 times of trying another clean ...
...error code indicates a problem with the analog pressure sensor, air hose or air trap. If the hose and trap are good you will need to replace the pressure sensorThe "Sud" error code indicates too much ...
...error code indicates a problem with the analog pressure sensor, air hose or air trap. If the hose and trap are good you will need to replace the pressure sensorThe "Sud" error code indicates too much ...
...error code & sears will not repair it. The reason is that the ownership transfer never went through even though I have the original owner, myself & a sears rep on the phone to make this ...
Question about Kenmore Elite Washing Machines
...error code f35 appears then washer shuts off kenmore elite HE5t suds then error code f35 F35 is a water level error. The water level switch (pressure switch) has malfunctioned. If you remove the top ...
...error code F35 is commonly associated with the Sud error, which comes on within a minute of running any cycle. It means the Analog Pressure Sensor (small plastic electronic circuit) has gone bad. It ...
...error code F35 is commonly associated with the Sud error, which comes on within a minute of running any cycle. It means the Analog Pressure Sensor (small plastic electronic circuit) has gone bad. It ...
...error code means that there is some sort of issue with the steamer electronic board and analog pressure sensor has gone bad. Check that the hose is firmly attached with the washer and is not blocked. ...
...error code, then the SuD flashing. Cleaned out the soap container & inspected the inside (as stated on page 21 of "Washer Care"). I tried different cycles but it shows the same error ...
...code error f35...think it needs presure switch part#w10415587 how much is it? That is a water level sensor, if it is still in warranty contact the manufacturer. If not look for the sensor and check ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions