2009 Chevrolet Aveo "egr valve" Questions

location egr valve I need to locate the egr valve on my 2010 chevy aveo. I need to clean it. Does anyone know where exactly it is? on the side next to the exhaust out let on side of engine.

...new plugs/coil pack. Could it be maf (sensor) or EGR valve? If it's only one cylinder then not likely a MAF or EGR. More likely a fuel injector or poor compression. Year, make, model, and

...EGR valve, 2. throttle position sensor, 3. Idol air control valve, 4. The rear crank position sensor, 5. the control module under the coil packs, and 6. the fuel filter. So far it seems to run a ...

...EGR valve / passages, Faulty camshaft position sensor, Defective computer. Possible solutions for this error problem:-- If there are no symptoms, the simplest thing to do is to reset the code and see ...

...oxygen sensor(s) * Faulty fuel injector(s) * Burned exhaust valve * Faulty catalytic converter(s) * Stuck/blocked EGR valve / passages * Faulty camshaft position sensor * Defective computer

...EGR valve can also cause a multiple mispfire code(P0300) but then it would be accompanied by an EGR code(P402) which means excessive flow detected. Anyways if was indeed a fouled up spark plug change ...

to check intake air sensor and the egr valve. check throttle position sensor and map sensor if unplugged the ecm and tcm get angry. disconnect battery for 15 min or so usually clears the service light

...EGR valve will also do the same thing. Start with the simple and inspect to see if you do have a external fuel filter, and inspect the wire leads to the IAC, EGR and clean them with throttle body ...

...transmission in a lower gear to help it climb, thats when it starts lugging...just a little bit of an incline without pushing down on the gas pedal i cleaned the egr valve on mine solved the ...

egr valve and bothb 02 sensors and still get same codes less the 02 code plugs and wires are good still runs sluggest what do i try next? You don't try anything The Codes you get are sensors reporting