Will drilling holes in the stock pipes baffles cause any harm
Not at all Patrick. Just keep in mind that you do want
some back pressure and not all out "straight pipes" of
course....so start small. I'd say roughly 3/8".
And since I don't know the length of your baffle, I can't say
how many to drill.-but I have done this for a friend that was in need of help and I created my own baffle for him and it turned out great.
But in your case ,-Hypothetically speaking Let's say the baffle was
12" long...I would drill 3/8" holes, straight through and alternate
meaning sideways...then the next straight down. And I would drill every 3 inches.
I'm Guessing your looking for a 'lil more power and performance
and if you do it right, you can also increase the fuel mileage.
Please let me know how everything turns out, and on top of that,
Don't be afraid to first Build an exact copy of your baffle so
you can interchange " creations " till you get what you're looking
for.
Remember...the more exhaust that can escape the cylinder,
will help Pull more air and fuel into the cylinder.
thank ypu
×