SOURCE: what are the valve clearence specifications on a
1/1000 inch : inlet= 6-8 cold exaust= 10-12 cold. hope this gets u outta trouble AJ.
SOURCE: i bough yamaha dt 125 1994 model. i noticed when ...
The presence of water on the plug, lead and cap play havoc if old or hardened. Replace the cap with a newer "long sleeve" rubber boot that covers more lead and a real tight grip on the ceramic of the plug.
Spray some WD-40 aroung coil wires. You can make up a simple guard from aluminium tape to stop water spray encroaching coil from front tyre.
Check that there is no obstruction on the rear head fins allowing any deluge to fill sparkplug recess.
Ensure there is a good sealing gasket on your left side generator/stator cover and they cover is not distorted or loose.
Good idea to wrap one turn of insulation tape on the bars underneath the switch cluster to stop switchgear shorting out on handlebars when really wet.
Cheers.
SOURCE: 2003 Yamaha TT-R 125 L valve clearance
valve lash on the intake .003 to .005 inch, .08 to .12 mm,exhaust .004"to.0055 inch,.10 to .14 mm (cold engine).
SOURCE: what is the valve clearence
Valve clearance for Kymco Spike 125 ( cold )
Intake - 0.12 mm
Exhaust - 0.12 mm
If you have any doubts don't forget to post me a reply.If you are satisfied please rate my solution.
124 views
Usually answered in minutes!
×