Question about Yamaha Motorcycles
Have a Yamaha tw200 it has electrical power I installed a new battery now it won’t start. Headlights come on, kill switch is off, and it’s in neutral but it doesn’t even try to turn over. Any ideas? @
Bad or loose connections or batt is not at 12.6v-anyless bike will b weak..testit w a multimeter from autostore
Posted on Dec 25, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Take it to the shop and have them test the charging system. That way you don't buy a stator that you can't return then find that the problem was the regulator or the rectifier.
Posted on Apr 08, 2009
Here are the possibilities > > Bent clutch push rod, missing push rod ball bearing or push rod, worn out actuator shaft cam, Missing friction disk (5), or pressure plate (4), totally worn out friction disks, clutch plates not installed in the correct sequence, extremely weak clutch springs, stripped teeth on the clutch hub, wrong clutch cable length (inner cable vs outer cable), broken shaft, bent then broken shift fork stems, broken slider gear dogs and a missing shift fork pin.
You didn't say if anyone had worked on the clutch or gearbox so I am throwing in nearly EVERYTHING possible that could create the problem. A little more background and most of the above can be ruled out. Get back to us.
Posted on Apr 22, 2009
SOURCE: yamaha tw200 service manual
here's one from ADV rider:
and ads somewhere:
Posted on Sep 09, 2009
Check with a multi tester for voltage coming through the ignition switch lead wires + to switch wire - to ground you shoul get 12volt or higher, with the switch off you should have one live (feed from battery ), on you should have 2 or 3 in and out feed (possibly 2 out one for ignition one for light curuit), or disconnect the switch and check for continuity (12v battery wire and a bulb if you dont have a multi tester between each pin on the switch plug when turned on you should get a curcuit when on.
Posted on Jan 27, 2012
Tips for a great answer:
Apr 12, 2014 | 2007 Yamaha TW 200
Jul 06, 2011 | 2011 Yamaha TW200
May 20, 2011 | Yamaha V Star Silverado Motorcycles
Mar 25, 2011 | Yamaha TX 750 Motorcycles
Sep 29, 2010 | Yamaha TRX 850 Motorcycles
Aug 07, 2009 | 2003 Yamaha YZ 125
Aug 06, 2009 | 1983 Yamaha XJ 650
Aug 02, 2009 | 2006 Hero Honda Karizma
Jun 12, 2009 | 1997 Yamaha TRX 850
Apr 20, 2009 | 2001 Yamaha TW 200
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: