SOURCE: Need to set floats on an xj 700
with the float bowl off and holding the carb level, adjust the float where it is level and the jet is up enough to seal. float should be set then.
SOURCE: can i fit a xj 900 engine into my xj650 maxim
i belive it is a straight swap, but there are some points to watch for, here is a discussion on just that...
http://xjbikes.com/Forums/viewtopic/p=22001.html
Testimonial: "Great, good lead very helpful.give me the solution."
SOURCE: How do you determine the required oil level of the drive shaft?
there is a sight glass about the size of a nickle directly below the filler plug ,oil level should be midway or close to the top,you should see the oil level in the glass window,if not you'll have to remove the cover and clean or replace the sight glass window....
119 views
Usually answered in minutes!
×