At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it sounds like you may have a couple of problems, 1. the windows: faulty switch panel or sticky individual window switch. 2. the horn beeping once and the doors locking is most likely due to a faulty immobiliser module or key actuator.
They are all different but many systems will work if you leave key turned to on for 5 to15 minutes or so (need good battery) and then click right to start. Bigger issue may be chip key or ignition "reader" in vehicle may have lost contact due to age.
It will be expensive but Nissan spares sell replacement keys and the Nissan service centre will be able to program the new key to the vehicle immobiliser.
these immobilisers on hyundai are a chip installation in key ? considering age of car and use of ign key it may well be the worne key ist causing intermitant problem ? ask mother did she get either another ign master key or a tag with the key code number stamped on it for obtaining a replacement key with the car ? as with each new hyundai you get 2x keys and either one of the above with all documents/handbooks etc try hyundai main office b4 you consider trying to cut out immobiliser? this would affect your insurance if it is stolen and found to not have working immobiliser
After ages searching finally found this on the Cobra site....
A8510 KEY PROGRAMING
Ensure the immobiliser is disarmed :-
1) Switch the ignition ON and OFF three times then back to the ON position
within seven seconds.
2) The LED on the dashboard will light up signaling the unit is in programming
mode.
3) Touch an already programmed key onto receptical, the LED will extinguish
for one second
4) Repeat step 3 for all other keys (Max of 4 touch keys)
5) To exit programming switch off the ignition key (unit will automatically exit
programming after four keys)
NOTE :-
1) Programing procedure can only entered with the system disarmed.
2) If all keys have been lost the system will need to be replaced
×