2003 Yamaha YZ 250 Logo

Related Topics:

A
Anonymous Posted on Jul 17, 2012

What oil do I put in my yz 250 - 2003 Yamaha YZ 250

1 Related Answer

tombones

  • 3567 Answers
  • Posted on Mar 24, 2009

SOURCE: 2003 YZ 250 Oil Change

Use 10w40 in the gearbox. Get the oil from your Yamaha dealer along with any filter your bike may need. Some bikes use an oil change as the "filter". To drain oil, get the engine warmed up and turn it off. Put a pan under the gearbox and remove the oil drain plug. Replace the oil plug when the flow becomes a slow drip. Change oil in late spring, the middle of summer and in early fall. Remember to lube the chain and adjust it when needed. Lubricate the cables with liquid graphite. Lastly, install a stock spark plug. Now go for a ride.

Please rate this solution as a "FixYa" if I have answered your questions. Thanks!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

I would like to know what kind of gear oil to put in my 06 yz 250

Calls for 10w/30. Any brand of mc specific oil will work. ie: Yamalube or Honda GN4 or the more expensive stuff will all work. On the cheaper side, you can use Type F (only) automatic transmision fluid. Just watch the color and change it when it starts getting dark.


*Help me out. Rate me!
0helpful
1answer

How much gear lube do i put in the crank case of my 93 yz 250?

There is always a dip stick in the crank case to check the oil level. On the dip stick you will find two marks for Min and Max oil levels. The oil should never be more than the Max level and never below the Min level.
1helpful
1answer

How much oil should i put in my yzf 250

As much as it takes to come up on the oil stick between the marks. Use the proper oil ONLY
0helpful
1answer

How much oil do i put in a 1996 yz 250 and where is the oil check bolt? THANKS !

CHEK TOP OF ENGEN NEAR KICKSTART THERE SHOULD BE A NOB TURN IT LOOSE AND PULL IT OUT YOU SHOULD SEE A DIPSTICK WIPE CLEAN AND REPLACE TAKE OUT AGAIN LOOK AT MARK ON DIPSTICK FOR OIL LEVEL IF LOW ADD OIL TO THE MARK ON DIPSTICK
6helpful
2answers

YZ 250 F 2007 Fork oil level

how do i check my oil level on my yz 250
8helpful
1answer

2003 YZ 250 Oil Change

Use 10w40 in the gearbox. Get the oil from your Yamaha dealer along with any filter your bike may need. Some bikes use an oil change as the "filter". To drain oil, get the engine warmed up and turn it off. Put a pan under the gearbox and remove the oil drain plug. Replace the oil plug when the flow becomes a slow drip. Change oil in late spring, the middle of summer and in early fall. Remember to lube the chain and adjust it when needed. Lubricate the cables with liquid graphite. Lastly, install a stock spark plug. Now go for a ride.

Please rate this solution as a "FixYa" if I have answered your questions. Thanks!
0helpful
1answer

Oil

drain the fuel, locate the float bowl drain screw, lowest screw on the carb and loosen it to drain the carb. replace the fuel with proper pre-mix, replace the spark plug and it should be fine
Not finding what you are looking for?

71 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...