Windshield wipers work but interminent settings don't

Maybe worth checking wiper switch or wiper motor.If you have a multi-meter it maybe worth checking power supply to switch and motor..hope it helps.....

Hi,
The 'stalk' that controls all these functions is faulty. Your truck SHOULD still be under warranty...Take it in.

GL,
Td

That involves airbag removal & a lot of delicate work. Let someone experienced handle it.

sounds like a ground problem

Well first I would check the fuse box for burned out fuses. Then I would get a simple dc power tester and see if the windshield wiper motor is getting power. If you don't have a bad fuse and the motor is still getting power I would say the motor has burned out.

my 07 is fuse under dash number 41 look in your manual it will show you where it is located

If both wipers don't move, could be the switch or the wiper motor.

Dear Anne,

I don't understand the question. Struts don't pound against the bottom of the windshield. You Mean Windshield struts? I don't Get It.

Alex

replace the COMBINATION SWITCH