don't want to shift? fills a huge basket ,
1: grinds?
2: can't get in to some gears.? or all gears.? (engine running and not)?
3: clutch drags, clutch slips kills all gears, or just 5th.
drag kills them all and reverse 1st , its the canary gear. !! non synchro
4: noise.? or chatter, ****,larchig, or throwout hash ,?
here is the clutch page, link below.
the #1 failure for a gear not Selecting is a $5 fix.
the tip of the shifter shaft, plastic POS is broken, bar none this failure,#1 and sold only at SUZ, get em' while you can they are chapter 11 ANDGM/GEO is brain dead , ask them , and you get blank stares.
this can be proven, by selecting the gears by hand. running.
if failure, cant move those fork rods?
running? only
if you cant, the clutch is dragging. see why?
works stalled means the clutch drags.
can you shift to 1st stalled, start engine drive off can you get any gear? yes,if yes , constantly? with no grinding, the clutch is ok.
to do that manual shifter off test test the shifter must be removed.
the we get to the cable.
see the 1inch rule here, no guessing.
play set to spec, and you floor the pedal , person 2 sees 1 inch travel, (END new cable worry)
if it moves 1inch and the tranny can not be SELECTED.
the clutch is bad, if you can select only stalled motor.
if selection fails all time, stalled and running, the tranny is siezed.
covers every fail logged by 1000s of users
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html
×