Just need step by step of how to do it yourself.
Mine fell off twice so far once when going through snow and other was going through rainstorm had to use jack wrench to pry down and slip on belt which was hard to do and don't advise you to try. Ok the pulley directly under the alternator and in the middle of 3 other pulleys is the one that is the tensioner. To do this right use a 15 millimeter or 5/8 socket or open end wrench, the longer the handle the better so you can get good leverage maybe you have a pipe to slide over handle. There is a diagram of the way the belt goes on under the hood. I have a 2000 Dodge Grand Caravan
On the front of the engine, there is what they call a belt tentioner, you probably cant see it very well, but feel around and youll feel a square hole, a 3\8 wratchet will fit that hole, pull the wratchet towards you, releasing the belt.
P.S make sure you write down the way the belt was routed or there might be a diagram on the front of engine .
Very helpful
4,789 views
Usually answered in minutes!
how to re-install a new serpentine belt on a 2000 dodge grand caravan?
2002 dodge caravn 2.4 trying to loose the tenson
there is a smaller pulley between the bigger ones and another smaller one without grooves and smooth surface. now, which one is the tensioner, the smaller pulley with grooves or no grooves??
how to change/replace a alternator on a dodge caravan 2000 step by step
×