Serpentine belt routing diagram 2005 dodge 2500 4X4 cummins diesel

Jeff, Check the attached links,instruction and guides, diagram for a serpentine belt, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Amps Belt routing Installation and system start up for 6 7L Cummins
Serpentine Belt Routing
Drive belt routing
2011 dodge 6 7 cummins serpentine belt diagram Google Search

Fig. Accessory serpentine belt routing-4.3L, 5.0L and 5.7L engines without A/C




Fig. Accessory serpentine belt routing-4.3L, 5.0L and 5.7L engines with A/C

Fig. Accessory serpentine belt routing-6.5L Diesel engines

Fig. Accessory serpentine belt routing-6.6L Diesel engines

Hope this helps (remember to rate this answer).

Check this diagrams (click for zoom)...



Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines with A/C





Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines without A/C

Hope helps (remember rated this).

Here is what you need, hope it helps


# Serpentine Belt Ribs : 8
Belt Angle : 40 Deg
Outside Circumference (in) : 64.305"
Outside Circumference (mm) : 1633 mm
Top Width (in) : 1.087"
Top Width (mm) : 28 mm

if you buy your belt at autozone the routing is on the package

HI. The first link will be the routing with the AC, and the second link will be without the AC Compressor. Click below to access both diagrams.


CLICK HERE FOR THE ROUTING WITH AC.

CLICK HERE FOR THE ROUTING WITHOUT AC.

The routing diagram for your serpentine belt should be on the inside of your hood.

Below is the diagram for the serpentine/drive belt for a 2005 Dodge truck with a 5.9 Diesel. Best of luck and please return to rate this solution. Thank you and thanks for using Fixya!
Greg

get the belt routing from the local dealer.
they will not charge alot of money for a reprint from the factory service manual.
also
dayco belts come with the belt routing on the box.

no you should be able to do it There should be a routing label on the underside of hood or on the radiator support/ Its should not be very hard if you have one already just loosen the Alternator it will slide down get the other one ready look to see the way its routed then slide the new one and tighten up the alternator thats it/ Please rate my response thank you very much