It is located inside your transmission, you will have to take off the transmission oil pan to access it.
SOURCE: Describe your 2002 Chrysler Town &
Safety neutral switch o.k.? Tried moving shifter through all gears while holding key in start position?
SOURCE: Describe your 2002 Chrysler Town &
On the driver side of the intake plenum close to the throotle body is were your pcv valve is located :)
SOURCE: chrysler town & country shifts on first then seems to go to nuetr
Make sure the cable to the trans is adjusted properly.
SOURCE: 2002 town & country blower motor will not
In order to achieve different speeds for the fan motor, there is a bank of resistors that reduce the voltage depending on what speed is selected. This is basicaly the same design for all cars on the road. The fail mode causes the full voltage to bypass the resistor bank so the fan runs at high speed (maybe even higher than your normal high setting). On most newer vehicles, including your '02 T&C, to help keep the resistors cool, they are mounted to a heatsink and then that assembly is mounted in a hole in the A/C ductwork just below or behind the glovebox. My '02 T&C has the 3 zone auto temp control and it had a fancier resistor block, but the function is the same. You should be able to get the cheaper one for <$25 at a parts store.
592 views
Usually answered in minutes!
×