At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power steering resevoir is usually indicated by a red cap with a embosed picture of a steering wheel or road wheel on it. Sometimes it is not coloured but has the embosing on. If all else fails open the and look inside, the steering fluid will be red in colourl
if your steering wheel is hard do you mean its hard to turn it? If that is the case locate your power steering fluid bottle under the bottle it sits close to the water bottle resevoir and see if you have enough power steering fluid in. If by chance you have enough in then your next step will be to locate the power steering pressure switch and look if its damaged by chance.
Most filters for power steering are located in the resevoir. Check there first.. Remove the resevoir cap and see if the is a nut that you can un screw. or check to see if you can remove the cover of the resevoir. Make you sure are using the correct oil in the steering system or you will have problems.
how did water get in there? the reservoir has two lines the large one is the feed and small one is the return you need to remove the small line and make it dump into a separate container. but you have to plug the hole where the line came from so that res. doesn't loose clean fluid. now start engine as reservoir level drops keep filling until you see new fluid.
Coolant in 50% concentration goes into the coolant overflow bottle. Windshield wiper fluid into the wiper fluid bottle. Power steering fluid into the power steering fluid bottle. You do not need to add any other fluids to these. Do not add water to the washer fluid bottle for example, if you drive in a climate that would allow it to freeze.
REMOVE POWER STEERING PUMP AND YOU can get to the two bolts you refer to.as far as injectors once you remove the bolts holding rail to the intake you can wiggle the rail and injectors out. the injectors will come out with rail. timing cover does not need to come off
You need to drain the power steering, it won't be working fine if u don't correct it now. You must remove one of the hoses, start the vehicle while someone watches the flow of fluid, as soon as it stops draining, turn off the car, reconnect the hose, and fill w/ the proper fluid. To get the air out of the lines, (after refilling to cold mark),start car, turn wheels back and forth several times, recheck level, repeat if necessary countrycurt0
×