Where is the crank sensor located in the engine for a 2006 chevy impala SS 5.3 Ltr.
Usually ,& depending on engine, is located on the rear side of the engine block behindthe crankshaft balancer. Good luck!
SOURCE: Where is the camshaft position sensor located on a
it will be located under the power steering pump. you will need to remove pump to gain access to semnsor. do not have to take lines off just unbolt pump and can move enough
SOURCE: on a 2006 chevy impala it tells you to tighten the gas cap
There is no sensor for a loose gas cap. What is happening is that the evaporative emission system is sensing a "Large Leak". Usually code p0455. The computer sees this as the most probable cause is a loose gas cap depending on several factors it looks at. You would need to clear the code(s) and see if that was the problem. If the light comes back on, then you have a problem in the system that will not let it seal. Possible solenoid problem, leaking hose / line, etc.
SOURCE: Coolant Temperature Sensor location on 2006 impala
driver side of the engine block, forward and above the transmission. This piece threads into the engine block.
5,007 views
Usually answered in minutes!
×