The Neutral Safety Switch function is controlled by the Transaxle Range Sensor (TRS). This Switch is Located ON the Transmission with Plug Facing UP and it is on the Bumper / Driver Side of the Transmission You Simply UNPLUG Electrical Connecter, And then the Unit Screws Out of Transmission Counterclock Wise, Install REVERSE Procedure.
NOTE: Be sure to have a DRAIN PAN Under your Work Area as there May be SOME Fluid Drainage When Switch is Removed, Swap them Fast if Fluid Comes out Fast so as NOT to have to Replace A Bunch of Trans. Fluid.
1,212 views
Usually answered in minutes!
The problem with that is you can not turn it because all that you have to work with is a plastic housing that sticks out of the trans.
×