SOURCE: 2004 DODGE STRATUS 2.7L, Location of Crankshaft Position Sensor?
it is located on the right side of the motor, in the trans area. Actually in the bell housing.
SOURCE: where is the location of the crankshaft
It is on top of trans bell-housing / a ten mm. bolt holds it in place. may have to remove air filter to see it. it reads off of fly wheel, it is a little bit toured the fire wall on transmission . if you have perched the new one you will know more of what it looks like . hope this helps . feel free to ask again should you want any further assistance. maybe some one can supply a picture. Have a Good Day.
SOURCE: 2001 dodge caravan 3,3L
I was working for a company that used 1995 Caravan's for their sales force and I do not know of any sensor. I am confused by the term "cover".
Do you mean valve cover? If so does the sensor go somewhere? I can solve your problem, but I need move info. Please call or email me.
Either,way let me know the outcome. Your feed back is my only reward. Also, please rank my answer with as many thumbs as you think I should get.
TomE(414-475-5968)
SOURCE: where is the crankshaft position sensor on a 2003 dodge caravan 33L V6 engine
Hi there:
The 3.3/3.8L crankshaft sensor is located on the rear of the transmission housing, above the differential housing (The bottom of the sensor is positioned next to the drive plate...
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
My first guess would be the ASD relay.
Did you check to see if you are getting voltage to the coil, and a ground signal from the computer ?
Crankshaft -camshaft timing misalignment bank 1 sensor 1
- The pcm detects that the camshaft position is out of phase with the crankshaft position
Probable Cause[s]
1,530 views
Usually answered in minutes!
×