Serpentine belt diagram for a 93 Dodge Shadow V6 engine

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

SOURCE: serpentine belt diagram for my Ford V6 4.2L 97'

Lower left is the tensioner and above should the idler. Sometimes there is a diagram on the fan shroud or near the radiator. Without a picture I hope this makes sense.
Starting with the ac going over the top of its pulley and down to the power steering, to and under the crank shaft, going in and up and around left over the water pump to the tensioner (going under) and to the alternator over the top and then under the idler.

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

SOURCE: I just need a routing diagram for the serpentine

Below are 2 diagrams, 1 with AC, 1 without for serpentine belt routing:

SOURCE: I need the serpentine belt diagram for a ford

Here are two links to take you to the serpentine belt diagrams... choose your engine type.

V6-24 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S5021
V6--12 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021