03 Dodge Ram 3500 tail light wire code - Dodge Cars & Trucks

SOURCE: Change Dodge Ram tail lights from 2005 to new 2008

I just got a pair of 2008 tail light lens for my 2002 Dodge Ram 1500. If you look under the rear there is a connector that runs up to the tail light. This is a small harness. I believe that all you need to do is purchase the 2008 tail light harness. It looks like it will snap into the bottom of the stock harness and will fit the 2008 lenses.

Marvin

• 85242 Answers
• Posted on Jun 02, 2009

SOURCE: dodge ram 4.7 p0440

Symptoms You likely won't notice any drivability problems.
Causes A code P0440 could mean one or more of the following has happened:

• The gas cap is not installed or working properly
• The purge solenoid has failed
• The canister is plugged and not working properly

• Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
• Inspect the EVAP system for cuts/holes in tubes/hoses
• Inspect for damaged or disconnected hoses around the Evap purge solenoid
• Check and/or replace the sensor
• Check and/or replace the purge valve
• Have a professional use a smoke machine to detect leaks

SOURCE: stop brake switich wiring for a dodge ram 3500

I'm sending your wiring diagram for your 1999 Dodge Ram 3500 it's a complete anti-lock brake circuit that includes a stop light switch.

SOURCE: replace timing chain on 03 dodge ram 1500 with 5.7 hemi

i have an 02 and i purchased a repair manual from autozone

SOURCE: How to change transmission fluid and filter. 2004 dodge ram 3500

remove trans oil pan. there you will also see your trans filter,