SOURCE: need location of the erg sensor 2000 ford ranger
The egr valve has two sensors. One is an EGR position sensor which is physically attached to the EGR valve. The other sensor is the DPFE (Delta Pressure Feedback EGR) sensor, commonly called the EGR pressure sensor. It's location varies depending on the engine you have. You can fine this sensor by following the vacuum hose on the EGR valve. It will be with in inches of the EGR valve. The sensor will be black (plastic) or silver (metal), have two or three vacuum ports and an electrical connection on it.
The vacuum pressure sensor is a high failure item on fords. Any Ford parts department will have one in stock, as well as some aftermarket parts stores.
The new sensor may not look exactly the same as the old part, but will have all the hook ups as the old one. You may also need to replace the vacuum hose to the sensor as well
SOURCE: I need a picture
http://www.genuineservice.com/genuineservice/en/default?page=genuineService
Go this website. Pick owner guide then input vehicle info then pick get owner guide.Then pick owners guide 1st printing and your fuse info begins on page 140
SOURCE: Where can I find front brake pads for Ford Ranger
HI. These pads are available at any local or online auto parts store. Auto zone or O'Reilly's will be the best location locally if you are near one or the other.
SOURCE: 08 Ford Ranger 4.0 can't turn temp down only cold in max a/c no vacum to heater valve.
prob a broken vac line
SOURCE: I need a1993 foed F 150 4+4 4.9 liter vacum diagram complete
Click on link to view vacuum diagrams.
58 views
Usually answered in minutes!
×