Follow the following instructions.
https://www.2carpros.com/articles/ignition-switch-wont-turn-stuck
SOURCE: 1996 Jeep Grand Cherokee wiper arm
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
SOURCE: How do you program a 2002 Jeep Grand Cherokee FOB?
if you have an original working fob and your owner's manual,it will explain procedure,otherwise will have to go to dealer to be programmed
SOURCE: HOW TO REMOVE HEADLIGHT ASSEMBLY 2006 JEEP GRAND CHEROKEE
remove the 7mm bolt in the centre top of lamp unit then with a big screwdriver just behind headlamp prise outwards quite firmly
SOURCE: Ignition on my 2004 jeep grand Cherokee is locked,
tap the ignition lock cylinder with the plastic end of a scrwedriver (with the key removed). then insert the key and try to start. Try this several times. If you get it to turn immediately replace the igntion lock cylinder. The cylinder needs to be in the on position in order for the lock button to be depressed so that the cylinder can be removed from the housing.
If you still can't get it to turn than you will have to drill out the lock button in order to get the old lock cylinder out. I wouldn't recommend doing this unless you have some experience and understand what you are doing.
The lock button can be accessed by removing the lower steering column cover.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
503 views
Usually answered in minutes!
×