Are the L.E.D. light bulbs the right way around in their sockets???
The ground side of the L.E.D. must go to ground!!!!!
If they are grounded the right way then all the lights will work.
Normal bulbs will work which ever way they are put in.
L.E.D. bulbs will not!!!!
Regards
Geoff
Testimonial: "not sure but put original bulbs back in and low beam still dont work heard mention something about a BCM not sure where or what it is but going to Mazda today probably cost me a arm and leg by the sounds of it but Thanks anyway"
SOURCE: 2005 honda odyssey no low beam headlights
DIMMER SWICH, PROBABLY, WHICH IS INCORPERATED IN CONTROL ON STER. COLUMN?
SOURCE: low beam headlight /daytime light are not working
It's on the driver's side. Remove all the plastic & it's in there.Big rectangle, black box,about 1.5" thick,lotta wires.
SOURCE: low beams don't work - both out at the same time.
DID YOU CHECK THE BULBS?
Testimonial: "spot on."
SOURCE: 2003 envoy low beams will not work.fuses
For the I6 engine there is a relay for low beams, it's relay # 46. Switch it with relay #45 (runs the fan, same model relay) and see if your lights now come on. These 2 relays are the only 2 black ones in there (part # 15016745). Also, try to clean the contacts very well on the fuse box and the relay. If not, you may have some frayed wiring in the harness.
By the way, the high beam relay is #43, the gray one next to the windshield wiper relay #42.
1,588 views
Usually answered in minutes!
×