SOURCE: Fix Brakelight on Chrysler Crossfire 05
They Are Removed From The Inside. On The Inside Of The Car Find The Opposite Side Of Where The Light Is. There Will Be Either Carpet Or A Panel There Remove That And It Will Give You Full Access To The Lights. Use A Twist And Pull Motion To Remove The Light From Its Housing Then Replace The Bulb.
SOURCE: replacing headlight bulbs on a 2006 chrysler sebring
Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.
SOURCE: headlights only working in bright
check fuse panels for low beam fuses high and low beam are normally separately fused ,if that checks out most likely your mutifuction switch
SOURCE: I NEED TO LOCATE THE
found the fuze box diagram, if anyone needs it email me at [email protected]
When a headlight burns out on your Chrysler
Crossfire, you do not need to rush to the repair shop to have it
replaced. You can access the headlights in your Crossfire from within
the engine compartment, allowing you to change the headlight yourself.
The Crossfire uses an H7U headlight bulb, which you can find at auto
parts retail stores or at a Chrysler dealership.
Difficulty: Easy
122 views
Usually answered in minutes!
×