SOURCE: 2001 Ford Ranger V6 timing chain
Hello;
The Ford motors are pretty good. I had 280K on a 2.9 V-8 that only needed the oil changed every 3K. Unless you have fluctuatuation in the timing then you should be ok.
These engines use a chain rather than a belt and have excellent life.
Thanks;
Rich RPM Northwest
SOURCE: what are the torque specs for the camshaft bolts
...rotate the camshaft and crankshaft as necessary to align the
timing marks. Install the camshaft gear and chain. Torque the bolt to 46
ft. lbs. (62 Nm).
Hope this helps; also keep in mind that your
feedback is important and I`ll appreciate your time and consideration if
you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
SOURCE: NEED TORQUE SPECS AND SEQUENCE FOR 02 DODGE 2.4 V6 STRATUS
How do I know how to put the torque converte on the same holes like it was be fore to the fly wheel
Fig. Remove the jackshaft sprocket-4.0L SOHC Engine 2000-2001
Zooming link for Remove the jackshaft sprocket-4.0L SOHC Engine 2000-2001
To install:
518 views
Usually answered in minutes!
×