I was riding and it made a grinding noise than a popping noise and it stopped. It will run and I can move the shifter but it will not move
SOURCE: noise ... raddle
When the engine is cold, go under the car and try to shake the exhaust system at the approximate spot you hear the rattle coming from. It is most likely a heat shield for the exhaust, or a broken (rusted through) hanger for the exhaust making the noise you describe. You can probably correct it with a wire or couple of screws to secure the shield, or replace a hanger.
SOURCE: Shifter stick kept popping out of gear. eventually
It sounds like the hyd. clutch is not working. If the clutch won't release then you can't get the transmission in a gear while it is running, without that grinding noise.
SOURCE: when stopping and turning front wheels grinding noise and giving
worn out ball joints change them. in the front wheel on both left and right sides.
SOURCE: slight grinding noise in 3rd gear pops out now
your teansmission is going to be overhauled. it sounds like the synchros are going bad. the shifter has forks that move the gears. sometimes the forks wear out and it can cause the gears to wear out because the gears are not going into like they are suppose to. leave comment..
Testimonial: "after only the first solution I think you are correct "
SOURCE: i have lost all but
You will need to have the transaxle
removed and repaired
Figure $1500.00 min for trans
May as well do clutch while your in there
$2,500.00 Total
44 views
Usually answered in minutes!
×