It won't be a simple plug and play by any stretch of the imagination. Yes, it can be done - almost anything can be done with enough time and money - but there will be lots of wiring, computer, fuel, cooling system, radiator, PS, AC, exhaust, motor mounts, hose, belts, vacuum system, and other issues to contend with. I've done several non-original equipment engine swaps but they are very difficult and expensive to do.
SOURCE: remove fuel lines from the fuel filter on a 93 f150 ford truck
There is a special tool used to disconnect the lines from the fuel filter. You should be able to get them at any local automotive shop, i.e., Pepboys, Autozone, Chief Auto. It should be relatively cheap to buy this tool.
SOURCE: i put a 93 mustang 5.0 block in my 89 f-150 is the
depende on weather or not you changed the cam/crank?........if not., then you would use the firing order for the mustang.
SOURCE: were is the iat sensore located on my 89 mustang
it is located at the front of the intake on top behind the distributor, screwed into the intake manifold, should be availiable from Autozone for about 18 dollars, hope this helps, let me know
SOURCE: I have an 89 mustang with a 5.0 HO engine. How can
po202 means injector circuit open cylinder 2 you may have a bad injector or problem with wiring
45 views
Usually answered in minutes!
×