Do you have to route the serpentine belt over the fan on the 04 Dodge 2500 diesel with AC

SOURCE: Need serpentine belt diagram for Dodge Ram 3500 diesel truck

no you should be able to do it There should be a routing label on the underside of hood or on the radiator support/ Its should not be very hard if you have one already just loosen the Alternator it will slide down get the other one ready look to see the way its routed then slide the new one and tighten up the alternator thats it/ Please rate my response thank you very much

SOURCE: 2006 Dodge diesel belt routing diagram

Here's a link to the diagram you need...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8023

Testimonial: "Awesome! thank you so much for the quick response!"

SOURCE: I need a diagram show me how to replace the

HI. The first link will be the routing with the AC, and the second link will be without the AC Compressor. Click below to access both diagrams.


CLICK HERE FOR THE ROUTING WITH AC.

CLICK HERE FOR THE ROUTING WITHOUT AC.

SOURCE: how to change serpentine belt on 2004 dodge diesel

Hi CDC,

It's easy and doesn't require a prybar. Here's how:

• Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
• Get the belt around all the pulleys except the A/C compressor or Alternator.
• The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded 'tensioner' arm. Get your socket on the center nut of this pulley.
• Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  
• Slowly release the tension.
  
• You're done

Jeffrey Turcotte

• 8991 Answers
• Posted on Sep 06, 2010

SOURCE: I need a Serpentine belt routing diagram for 2004

from autozone.com